Let the Burner’s Working Parts Set the Fireplace Footprint
An automatic ethanol burner is more than a flame tray. It combines a combustion area with an electric board, pump, tank, sensors, and filling system, so the custom fireplace must be designed around those working parts rather than around the visible opening alone. In the intelligent burner range described by Art Fireplace, the bio-ethanol tank and burning hearth can be separate. That separation gives a designer useful flexibility: the flame can occupy the focal point while the tank and service components sit in a nearby enclosure that is planned for access. The mistake to avoid is treating the burner as a decorative insert that can be squeezed into any surround after the mantel is built.
Begin with a simple zoning exercise. Mark the flame opening, the burner body, the tank location, the control board, and the route for filling and service. Because custom ethanol fireplace sizes can range from 40cm to 300cm, and ribbon ethanol fires are also listed in that span, the scale of the fireplace and the burner should be resolved together. A long ribbon fire may call for a different tank location than a compact square burner. Materials should also be coordinated early; stainless steel and MDF appear in the supplier’s material notes, and the custom surround may use frames, glass, panel colors, and shapes that require precise interfaces with the burner. The goal is a clean elevation on the room side and a logical mechanical layout behind it.
Once those zones are marked, test the design with a service scenario. Imagine the tank being checked, the pump being reached, and the control board being inspected without moving the mantel or touching the flame opening. If the route is awkward on paper, it will be worse in the finished room. A simple section drawing through the fireplace can reveal whether the tank bay, burner body, and control cavity compete for the same space.
Design Tank Access as a Dedicated Service Zone
Tank access is the part of custom fireplace design most likely to be underestimated. Automatic burners can offer automatic filling injection as well as manual filling injection, and an electric pump can move fuel to the combustion tray. Even so, the tank remains a component that must be reached, checked, and serviced. A separate tank compartment can be reached through a hinged panel, a removable plinth, or a side cabinet, but it should not require dismantling the fireplace surround or moving decorative logs. The access route should be independent of the flame-viewing opening so that routine filling does not disturb the burner or the finished interior.
The listed AS50 indoor square automatic model, for example, has a 12.5 L tank capacity and 1.1 liter/hour consumption, which illustrates why tank planning deserves real space in the design. Whether the final project uses that model or another configuration, the lesson is the same: the tank’s position, filling method, and ventilation around the compartment need to be drawn before fabrication. Keep electrical connections, the pump, and any manual fill point reachable without leaning over the flame. If the fireplace has a raised hearth or a built-in cabinet, use that architecture to create a discreet tank bay rather than hiding the tank in a sealed void. Label the access panel inside the project documents so that installers and future service technicians understand how the system is meant to be approached.
Put Controls, Sensors, and Safety Features within the Plan
Automatic ethanol burners are controlled by an electric board with an ON/OFF button and remote control, and the supplier’s intelligent models list features such as child lock, audio effect, automatic extinction or ignition, and AC or battery charging with a battery loader. These features are only useful if the control components are accessible and the sensors are not blocked by the custom design. The control module should have a service position; the remote receiver should not be buried behind a panel that is difficult to remove. For households with children, the child lock function is a planning point, not an afterthought, and the button or remote should be kept in a sensible place for adult use.
Safety sensors need the same attention. The intelligent burner description includes a CO2 safety infrared detector that stops the fire if unauthorized levels are reached, electronic heat detectors that trigger automatic extinction at unauthorized temperatures, and a shake-off function if the burner is moved by external force. A custom fireplace should not place decorative elements, glass, or cabinetry where they can obstruct those sensor paths or interfere with the burner’s stability. The burner should sit in a rigid, well-supported part of the fireplace, not on a floating shelf that can shift. Plan the sensor and control layout with the same care as the flame opening, and document the final positions for installation and maintenance.
Coordinate Custom Details with Bioethanol Fireplace Manufacturers
Custom fireplace work moves more smoothly when the burner supplier and the fireplace fabricator review the same drawings. The supplier’s range includes manual and automatic fireplaces, flame-controlled automatic fireplaces, one-stage, three-stage, and six-level flame options, outdoor models, villa fireplaces, and fireplace accessories. That breadth is useful, but it also means the tank location, control method, flame level, and material details must be matched to the specific model rather than assumed. Ask for installation instructions, the instruction manual, and after-sales guidance as part of the package, and use those documents to confirm clearances, electrical needs, and service access before the surround is finalized.
For unusual shapes, such as an L-shaped insert or a very long ribbon fireplace, the coordination should include the final surround dimensions and the burner’s service points. The supplier’s range includes L-shaped automatic inserts and ribbon ethanol fires from 40cm to 300cm, so a custom plan should show how the burner, tank bay, and control access fit within the overall geometry. This is also the moment to confirm panel colors, glass, frames, and installation instructions with the fabricator, because a late change to any of those details can affect the access panels that were already planned.
When comparing Bioethanol Fireplace Manufacturers, look for a supplier that can discuss both the burner and the integration. Art Fireplace describes custom ethanol fireplace services, custom frames, frames, glass, panel colors, and shapes, along with design and production resources such as 10+ designers and multiple production lines. Those capabilities matter when a fireplace has a nonstandard tank bay, a concealed control panel, or a narrow service opening. The best custom design is not the one that hides the most hardware; it is the one that makes the flame look effortless while keeping the tank, controls, and safety sensors reachable.




